Our Rates
| Material | Cost $/gram | Hourly Rate (USD) | Notes | Shipping Weight (USPS) | Shipping Cost | Modeling Services |
|---|---|---|---|---|---|---|
| PLA | $0.12 | $3.00 | Entry-level, low-warp | <=1lb | $5 | $10 min |
| PETG | $0.14 | $3.50 | Strong, more durable than PLA | 1lb-70lb | $8-$15 | $7.50 per 15 min |
| TPU (95A) | $0.18 | $4.50 | Flexible parts, slower print speeds | - | - | - |
| PVA | $0.25 | $5.00 | Support material, limited without AMS | - | - | - |
| ABS | $0.14 | $5.00 | Durable, moderate heat resistance | - | - | - |
| ASA | $0.16 | $5.00 | UV-resistant, stronger than ABS | - | - | - |
| PC (Polycarbonate) | $0.18 | $5.50 | High temp, high strength, must be dry | - | - | - |
| Nylon (PA) | $0.20 | $5.50 | Absorbs moisture rapidly | - | - | - |
| PA-CF | $0.28 | $6.00 | Abrasive, strong, light | - | - | - |
| PETG-CF | $0.24 | $5.50 | Less brittle than PLA-CF, Abrasive | - | - | - |
| PLA-CF | $0.20 | $4.50 | Stiffer than PLA, still brittle, Abrasive | - | - | - |
| Glow PLA | $0.18 | $4.00 | Abrasive | - | - | - |
| PC-CF | $0.30 | $6.00 | Tough + heat-resistant, Abrasive | - | - | - |
| PA-GF | $0.28 | $6.00 | Heat + chemical resistant, strong, Abrasive | - | - | - |
*Multi-Material Printing not currently available
Regular Nozzle Sizes: 0.2mm, 0.4mm, 0.6mm, and 0.8mm
Hardened Steel Nozzle Sizes for Abrasive Materials (AM): 0.4mm